High Purity Water System for Advanced Manufacturing Customer

Atlas High Purity Solutions summarizes the design and installation of a pretreatment + reverse osmosis high purity water system for an advanced manufacturing facility in New England

Challenge: A premier advanced materials manufacturing facility in New England required a constant supply of reverse osmosis (RO) water for its manufacturing processes. Permeate of <10 microsiemens/cm was required. A municipal water supply would be feeding the facility, requiring RO pretreatment to be designed and put in place ahead of the RO. Peak flow requirements were ~35 gallons per minute (GPM) of RO permeate. 

Solution: Atlas and Pure Flow designed a custom high purity water solution with the following components:

• Backwashing duplex parallel carbon tanks for dechlorination and RO pretreatment
• Backwashing duplex alternating water softener for hardness reduction and RO pretreatment
• Suez (previously GE Water) E4-H Reverse Osmosis – 4” membranes, horizontally-oriented membrane housings

The complete system was pre-piped and skid mounted at our facility prior to shipment to site for start up and commissioning. The system operates flawlessly and meets all customer specifications. 

__

Atlas High Purity Solutions has been designing, installing, and servicing high purity water systems for more than thirty years, and is the leading provider of reverse osmosis and DI water solutions in the northeast United States.