Atlas High Purity Solutions logo
Ë
By Atlas High Purity Solutions team • April 22, 2019

120 GPM DI Water System for Northeast Medical Device Manufacturer

Atlas High Purity Solutions summarizes the design and installation of a 120 GPM DI Water System for a Northeast Medical Device Manufacturer

 
Challenge: A New England-based medical device manufacturer DI water system jumborequired a deionization polishing system to supply 120 GPM of deionized water throughout their facility for multiple applications and points of use. The polishing system was fed by an existing reverse osmosis (RO) system. The space available for the equipment was very limited. Installing a system of this capacity would require detailed engineering work to ensure that all equipment fit perfectly into the proposed space and could be delivered in pieces to the room via various service clearances throughout the building. 

Solution: Atlas designed a customized solution that includesSiemens B4 System Layout Picture SW duplex pumps, redundant PLCs, 42 CUFT “Jumbo” deionization tanks, disinfection and TOC reduction UVs, a 1000-gallon nitrogen-blanketed storage tanks and 0.2 micron absolute-rated final filters.  Using SolidWorks, Atlas engineered the system to fit squarely into the limited available space. 

Equipment was pre-piped and skid mounted prior to delivery to the site. Atlas’s technicians completed all necessary piping and connections on site in order to connect the system to the existing loop piping. 

Photo Apr 02, 1 09 55 PM

Photo Apr 02, 1 07 40 PM
__

Atlas High Purity Solutions has been designing, installing, and servicing high purity water systems for more than thirty years, and is the leading provider of reverse osmosis and DI water solutions in the northeast United States.

Let's discuss your high purity system!